Black Friday and Cyber Monday are here! So to celebrate, we’re announcing the Castle “Black 5 Day Special”.
Let’s start to wrap-up 2014 with FREE U.S. SHIPPING for online orders of $20.14 or more. That’s right — we’re gonna save good ol’ Santa some work later on by picking up the shipping charges now.
This promotion runs from Thanksgiving Day all the way through midnight (central time) on Monday, December 1st. That’s five days of free freight for all your Castle goodies.
To take advantage of the free shipping, you MUST enter BLACK5DAY into the promo code when placing your online order.
We all have a lot to be thankful for. Here at Castle, we are thankful for you, our loyal customers and true-blue R/C enthusiasts.
Please have a safe and wonderful Thanksgiving holiday!
It has come to our attention that a very limited number of 14xx series and 15xx series motors may have been assembled with Front End Bells that were not properly machined during manufacturing. Affected motors will have one or more of the three screws that attach the Front End Bell to the green motor body/can protruding above the top surface. The protruding screw(s) will cause improper alignment of the motor (and the customer-installed pinion gear) once it has been installed onto the vehicle. This misalignment could result in damage to the vehicle’s spur gear or the motor’s pinion gear.
Customers who purchased a Castle 14xx or 15xx series motor AFTER JULY 1, 2014 are encouraged to closely examine the Front End Bell of their motor. If the head of the machine screw extends above the plane of the Front End Bell (illustrations above), you are asked to contact Castle Creations Customer Service Team via email (firstname.lastname@example.org) or call 913-390-6939 between the hours of 9 AM and 5 PM CST, Monday through Friday. A Castle Customer Service Representative will discuss corrective measures with you personally.
For more information and possible affected part numbers, view the full Service Advisory on the Tech Support page.
If you happen to be one of the owners of the new Talon HV120, you may see a strange pop-up window when trying to connect to the Castle Link. This is what it will look like.
The ESC is still fully programmable and works with 100% functionality on the Castle Link. This pop-up is simply informing you that firmware updates are disabled for the Talon HV120. This is because it is a new product line and there is currently only one firmware version available, hence, no updates.
Since you cannot select a different firmware version, the firmware update option has been temporarily disabled. However, when a new version of firmware is released for the Talon HV120, this notification will disappear.
We are currently working on adapting firmware version 4.20 to the Talon HV120. Version 4.20 is the same version current available for the Phoenix Edge and Phoenix Edge HV series ESCs. Once it is available, this update will allow the Talon HV120 to work on high pole count, high inductance out runner motors like the newer Hacker 28-pole out runners.
Castle is proud to have the design and engineering teams at Blade helicopter select our proven and reliable Talon 15 ESC for their all-new E-Flite Blade 180 CFX helicopter. This micro heli (with 700-size features) packs a big 3D performance punch and even features a carbon fiber frame to house all the components.
However, pilots wanting to fine-tune the performance of their Talon 15 controller via Castle Link will need to purchase an adapter from Horizon Hobby. This adapter allows the pilot to connect Castle Link to the 180 CFX’s receiver.
The Horizon “Universal Adapter” retails for $6.99 and is available directly from Horizon Hobby or your favorite Blade retailer.